|
|
|
|
|
|
|
|
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
|
|
|
|
|
Build Your Online Product Catalogs?
Product Name: |
ASTM A192 superheater tubes
|
Supply Ability: |
|
Related proudcts |
superheater tubes, astm a192, astm a192 superheate, |
Specifications |
The ASTM A192 belongs to the carbon seamless tubes, which is spe |
Price Term: |
FOB,CNF,CIF |
Port of loading: |
Main sea port of China |
Minimum Order |
10 |
Unit Price: |
1000 |
|
ASTM A192 superheater tubes ASTM A192, heater tubes, Seamless tube, superheater tubes
The ASTM A192 belongs to the carbon seamless tubes, which is specially designed for high, middle, low pressure purpose in seamless carbon steel boilers and as super heater tubes.
ASTM A192 �American Society for Testing Materials standard ASME SA192 -American Society of Mechanical Engineers standards This guide covers standard specifications for minimum-wall-thickness, seamless carbon steel boiler and superheater tubes for high-pressure service. The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, and silicon. The tubes shall have a hardness number not exceeding a specific value. The following mechanical tests shall be conducted, namely: flattening test; flaring test; hardness test; and hydrostatic test.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
General scope
This specification covers minimum-wall-thickness, seamless carbon steel boiler and superheater tubes for high-pressure service. The tubing sizes and thicknesses usually furnished to this specification are ½ in. to 7 in. [12.7 to 177.8 mm] outside diameter and 0.085 to 1.000 in. [2.2 to 25.4 mm], inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification. Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] inside diameter or 0.015 in. [0.4 mm] thickness. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exac |
Company: |
Sunny Steel PipeFitting Industries
|
Contact: |
Mr. Peter Lee |
Address: |
No.903,North ZhongShan No.1 Road, Shanghai, 200235, China |
Postcode: |
200235 |
Tel: |
0086-21-61851035 |
Fax: |
0086-21-61851035 |
E-mail: |
|
|
|